- تلگرام شرکت هونام انرژی
- امواج هارمونیک چه اثری در برق دارد ؟
- دوره آموزش تئوری و عملی رله و حفاظت
- دوره آموزشی نرم افزار NEPLAN
- حفاظت از سرج برای ایستگاه شارژ خودرو الکتریکی
- حفاظت از سرج برای LED Street Light
- حفاظت از خروجی برای صفحه نمایش LED
- حفاظت از سرج برای توربین بادی
- حفاظت از سرج برای سیستم خورشیدی / PV
- حفاظت از سرج برای سیستم راه آهن
آخرین مطالب
امکانات وب
مدیر آموزش: خانم تک
تلفن: 77614907-021تلفکس: 77528354-021موبایل: 09123461783www.hoonam-energy.comEmail: [email protected]
نرم افزار DIgSILENT مقدماتی
تاریخ اجرا
روز و ساعت
تاریخ خاتمه
تاریخ شروع
ردیف
روز های چهارشنبه پنجشنبه و جمعه 8-16
2/7/95
31/6/95
1
مطالعات و طراحی جامع سیستم زمین
تاریخ اجرا
روز و ساعت
تاریخ خاتمه
تاریخ شروع
ردیف
روز های چهارشنبه پنجشنبه و جمعه 8-16
9/7/95
7/7/95
1
نرم افزار ETAP پیشرفته
تاریخ اجرا
روز و ساعت
تاریخ خاتمه
تاریخ شروع
ردیف
روز های چهارشنبه پنجشنبه و جمعه 8-16
30/7/95
28/7/95
1 مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : دورهای تخصصی مهندسی صنایع, نویسنده : electrical-power-enga بازدید : 376 تاريخ : دوشنبه 29 شهريور 1395 ساعت: 13:28
Power Cable Ampacity Rating
The CYMCAP software is dedicated to the calculation of ampacity and temperature rise calculations for power cable installations. The accuracy of the software provides increased confidence when upgrading power cable installations and designing new ones; maximizing the benefits from the considerable capital investment associated with them. It also helps increase system reliability and supports the proper utilization of the installed equipment.
Features
The CYMCAP software is dedicated to performing ampacity and temperature rise calculations for power cable installations. Determining the maximum current power cables can sustain without deterioration of any of their electrical properties is important for the design of electrical installations. It addresses steady-state and transient thermal cable rating as per the analytical techniques described by Neher-McGrath and the Inteational Standards IEC 287© and IEC 853©. This software was developed join مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 296 تاريخ : يکشنبه 28 شهريور 1395 ساعت: 10:52
Protective Device Coordination
The CYMTCC software addresses Time Over-Current protection for Industrial, Commercial and Distribution Power systems. The program comes with an extensive database of over 15000 protective devices from more than 100 different manufacturers that are easily accessed to produce Time-Current curve plots and device settings reports. It also features several tools and reports to help you achieve coordination and protect transformers and cables.
Program Features
The CYMTCC software provides a powerful “CAD-like” editor that allows building the network One-Line Diagram by simply clicking and dragging device symbols onto the drawing. The time-current characteristic curves for the protective devices can be visualized onscreen, plotted on standard log-log paper and routed to various printers. The One Line diagram and the Time-Current curve can be exported to files for inclusion in other reports as well. The program is capable of generating all the necess مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 263 تاريخ : يکشنبه 28 شهريور 1395 ساعت: 10:52
CYMGRD, Substation Grounding Program
The CYMGRD software is a substation grounding grid design and analysis program specially developed to help engineers optimize the design of new grids and reinforce existing grids, of any shape, by virtue of easy to use, built-in danger point evaluation facilities. User-friendly data entry, efficient analysis algorithms and powerful graphical facilities make the CYMGRD software an efficient tool that helps the engineer arrive at technically sound and economical designs.
Program Features
The use of the CYMGRD software allows for the rapid analysis of various design alteatives to choose an economical solution for any particular installation. The program conforms to IEEE 80™ 2000, IEEE 81™ 1983 and IEEE 837™ 2002.
Analytical Capabilities
Finite element analysis of the ground grid conductors and rods
Computation of the station ground resistance (Rg) and the Ground Potential Rise (GPR)
Touch and surface potential analysis, insi مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 350 تاريخ : يکشنبه 28 شهريور 1395 ساعت: 10:52
EMTP-RV, Electromagnetic Transient Program
EMTP-RV is a specialized software for the simulation and analysis of transients in power systems. The EMTP Development Coordination Group (DCG) was the result of over 20 years of extensive research. EMTP-RV is the world’s most full-featured simulation and analysis program for power system transients. Developed and maintained by POWERSYS, under the control of the DCG, the EMTP-RV package includes a very intuitive GUI (graphical user interface), a completely reprogrammed computational engine and an advanced output processor. It features a wide variety of modeling capabilities for studying various phenomena ranging in duration from microseconds to seconds. Uses include switching and lightning surge analysis, insulation coordination, shaft torsional oscillations, ferroresonance and power electronics applications (microgrids, HVDC, VSC, etc.) in power systems.
Applications
EMTP-RV is suited to a wide variety of power system studies, whether مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : emtp,rv,emtp,rv vs pscad,emtp,rv crack,emtp,rv download,emtp,rv free download,emtp,rv software free download,emtp,rv 2 5 1 crack,emtp,rv training,emtp,rv software,emtp,rv 3 0, نویسنده : electrical-power-enga بازدید : 268 تاريخ : يکشنبه 28 شهريور 1395 ساعت: 10:51
Put the most powerful tools for electric transmission analysis right at your fingertips.
Are you involved in the analysis and planning of electric utility transmission systems? Then, it’s time to discover Commonwealth’s proprietary highly interactive, powerful desktop software products – and the unmatched, personalized training and superior user support behind them. We know you have choices; that’s why we work harder to provide you with more value and better service.
We are proud to announce the newest family of products – Transmission Grid Analytics™ – with the currently available modules:Mapping and Cascade Analysis. Both of these are powered by our foundation product, TRANSMISSION 2000 ®, used by utilities, municipalities, and world-class educational institutions. Call (517) 788-3676 for details or to set up a personal demonstration today.
We offer modules for:
Transmission Grid Analytics™
Transmission Grid Analytics™ - Mapping
Regional Transmiss مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : معرفی نرم افزارهای گرافیکی,معرفی نرم افزار هک وای فای,معرفی نرم افزار,معرفی نرم افزار اندروید,معرفی نرم افزارهای جالب اندروید,معرفی نرم افزارهای حسابداری,معرفی نرم افزار spss,معرفی نرم افزار آیفون,معرفی نرم افزارهای اندروید,معرفی نرم افزار اتوکد, نویسنده : electrical-power-enga بازدید : 206 تاريخ : شنبه 27 شهريور 1395 ساعت: 9:29
CYME Power Engineering Software
The CYME Power Engineering software is a suite of applications composed of a network editor, analysis modules and user-customizable model libraries from which you can choose to get the most powerful solution. The modules available comprise a variety of advanced applications and extensive libraries for either transmission/industrial or distribution power network analysis.
CYME Applications for Distribution power systems analysis (CYMDIST)
CYME Applications for Transmission and Industrial power systems analysis
Additional software useful to the power engineer are also available:
Cable Ampacity Calculations (CYMCAP)
Protective Device Coordination (CYMTCC)
Grounding Grid Design and Analysis (CYMGRD)
Electromagnetic Transients Simulation and Analysis (EMTP)
CYME Software Solutions
Reference: CYME
مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : معرفی نرم افزارهای گرافیکی,معرفی نرم افزار هک وای فای,معرفی نرم افزار,معرفی نرم افزار اندروید,معرفی نرم افزارهای جالب اندروید,معرفی نرم افزارهای حسابداری,معرفی نرم افزار spss,معرفی نرم افزار آیفون,معرفی نرم افزارهای اندروید,معرفی نرم افزار اتوکد, نویسنده : electrical-power-enga بازدید : 248 تاريخ : شنبه 27 شهريور 1395 ساعت: 9:29
EMTP-RV is a specialized software for the simulation and analysis of transients in power systems. The EMTP Development Coordination Group (DCG) was the result of over 20 years of extensive research. EMTP-RV is the world’s most full-featured simulation and analysis program for power system transients. Developed and maintained by POWERSYS, under the control of the DCG, the EMTP-RV package includes a very intuitive GUI (graphical user interface), a completely reprogrammed computational engine and an advanced output processor. It features a wide variety of modeling capabilities for studying various phenomena ranging in duration from microseconds to seconds. Uses include switching and lightning surge analysis, insulation coordination, shaft torsional oscillations, ferroresonance and power electronics applications (microgrids, HVDC, VSC, etc.) in power systems.
Applications
EMTP-RV is suited to a wide variety of power system studies, whether they relate to project design and engin مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : electromagnetic transients,electromagnetic transients program,electromagnetic transients in power systems,electromagnetic transients in power systems by pritindra chowdhuri,electromagnetic transients program reference manual,electromagnetic transients in power cables,electromagnetic transients in power systems by pritindra chowdhuri pdf,electromagnetic transients in power systems pdf,electromagnetic transients in power cables pdf,electromagnetic transients program theory book, نویسنده : electrical-power-enga بازدید : 267 تاريخ : شنبه 27 شهريور 1395 ساعت: 9:29
The CYMDIST software performs several types of analysis on balanced or unbalanced three-phase, two-phase and single-phase systems that are operated in radial, looped or meshed configurations. The software includes a full network editor, as well as:
Unbalanced load flow
Comprehensive fault analysis
Load balancing
Load allocation/estimation
Optimal capacitor placement
The CYMDIST Distribution Analysis software is a suite of applications composed of a network editor, analysis modules and user-customizable model libraries from which you can choose to get the most powerful solution. The program is designed for planning studies and simulating the behavior of electrical distribution networks under different operating conditions and scenarios. It includes several built-in functions that are required for distribution network planning, operation and analysis. The software workspace is fully customizable. The graphical representation of network components, results and reports can be built مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : cymdist , distribution system analysis, نویسنده : electrical-power-enga بازدید : 240 تاريخ : شنبه 27 شهريور 1395 ساعت: 9:29
What is selectivity?
The electrical design industry has historically required electrical system circuit breaker selections and settings be validated with a short circuit and coordination study performed by a licensed engineer. These studies assure that circuit breakers are capable of interrupting the available current and would operate “selectively”.
Traditionally, “selectivity” in a low voltage electrical system meant that the long time and short time portions of time-current curves (TCCs) would be selective, i.e. the circuit breaker closest to the fault would trip first, maximizing the amount of the electrical distribution system left in service
In most cases, the circuit breaker instantaneous overcurrent (IOC) TCCs would not be selective “on paper,” as they typically overlap.
Traditionally, selectivity between molded case circuit breakers (MCCBs) and insulated case circuit breakers (ICCBs) was considered effective, even if there was an overlap of TCCs in the مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : guide to low voltage electrical system design and selectivity – general electric, نویسنده : electrical-power-enga بازدید : 211 تاريخ : پنجشنبه 25 شهريور 1395 ساعت: 11:03
NEPLAN Electricity is a software tool to analyse, plan, optimize and simulate networks. The user-friendly graphical interface allows the user to perform study cases very efficiently. The customizable software has a modular concept and covers all electrical aspects in transmission, distribution, generation / industrial networks. It suits best for
Renewable energy system and
SmartGrid application
because all necessary models and simulation methods are integrated with a very high accuracy and performance. Besides steady state calculations, power quality and optimization aspects and protection design, the NEPLAN simulator allows to model wind and solar power plants with their controls for dynamic simulations (RMS/EMT) in detail and integrates also Matlab/Simulink models.
The software is available in different technologies: as desktop application, in the web browser as inteet solution on the cloud or as intranet solution and as a web service (see box “technologies” below)
The commo مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : nepal electricity, نویسنده : electrical-power-enga بازدید : 273 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
NEPLAN Gas, NEPLAN Water and NEPLAN Heating is a software tool to analyze, plan, optimize and simulate networks. The user-friendly graphical interface allows the user to perform study cases very efficiently.
The customizable software has a modular concept and covers all aspects relevant and useful for the calculation of Gas, Water and Heating networks. NEPLAN is the only tool on the market that allows the user to simulate electricity, gas, water and heating networks simultaneously. This feature enables the User to model any interaction between those networks.
The software is available in different technologies: as desktop application, in the web browser as inteet solution on the cloud or as intranet solution and as a web service
Reference: NEPLAN
مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : neplan gas tutorial,neplan gas, نویسنده : electrical-power-enga بازدید : 332 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
The NEPLAN Asset Management Tool answers the questions “what happens if…”. This Tool offers outmost flexibility modelling any system, it allows the asset managers to evaluate each asset individually and define a medium and long-term asset strategy in order to optimize the investment and maintenance planing as well as the power supply reliability and many more.
The customizable software has a modular concept and covers all aspects of
Operational Asset Management
Strategic Asset Management
The software is available in different technologies: as desktop application, in the web browser as inteet solution on the cloud or as intranet solution and as a web service.
Reference: NEPLAN
مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : neplan asset management, نویسنده : electrical-power-enga بازدید : 246 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
NEPLAN 360 is the first fully browser based power system analysis tool on the market and offers all advantages of cloud and intranet computing. The software does not need to be installed on a specific desktop computer or notebook, but is accessible through Login and Password everywhere through Intranet or Inteet. The most part of commercial available browsers are supported, e.g. Inteet Explorer, Google Chrome, Safari, Mozilla Firefox.
Intranet solution
For intranet solution the software will be installed on the client’s server as well as the SQL-database containing the network. The multi-user database is based on MS-SQL or Oracle and built to handle large networks and also a large number of users. A comprehensive user administration is available for handling access rights of the master database. Study cases (e.g. network extension plan) originated from the master database are managed user-specifically. The software can access map servers which are used by the Geograph مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 299 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
XGSLab is one of the most powerful software packages for grounding system analysis, electromagnetic fields, interference and lightning analysis and the only software on the market that takes into account both EN and IEEE Standards.
XGSLab includes the modules:
GSA (GROUNDING SYSTEM ANALYSIS) for regular application (applicable in most practical cases).
GSA_FD (GROUNDING SYSTEM ANALYSIS in the FREQUENCY DOMAIN) for electromagnetic fields and interference evaluations for overhead and underground systems and for fault current distribution calculations.
XGSA_FD (OVER AND UNDER GROUND SYSTEM ANALYSIS in the FREQUENCY DOMAIN) for electromagnetic fields and interference evaluations for overhead and underground systems and for lightning effects and fault current distribution calculations.
All modules are integrated in an “all in one” package and based on a hybrid calculation method (or “PEEC” method) which considers transmission line, circuit and electromagnetic theory combined int مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : neplan grounding, نویسنده : electrical-power-enga بازدید : 349 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
The NEPLAN Research Toolbox has been specially designed for researchers and developers which need to develop new power system models (e.g. control strategies) and new algorithms (e.g. SmartGrid applications). The Toolbox includes besides many NEPLAN calculation and simulation modules:
1. The NPL NEPLAN Programming Library, which is a C/C++ API that allows to access NEPLAN data and calculation algorithms includes amongst others the following functions:execute any NEPLAN calculation engine
read/write access to all variables of all components
add / change /delete components and graphical data
retrieve the results from the NEPLAN analysis
2. An easy to use C/C++ API that allows developing user defined models for load flow calculations
3. A function block drawing editor, which allows to develop user defined models for controllers and primary components with function blocks
4. A Matlab interface, which allows developing dynamic user defined models (controllers and primarycomponents). The m مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 225 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
NEPLAN has been selected by the Swiss, German, Austrian and Czech electrical organizations (VSE, VDN, VEÖ, CSRES) to develop and maintain a software, which allows the evaluation of electrical equipment connection to LV and MV networks according to the standard “Technical Rules for the Assessment of Network Disturbances D-A-CH-CZ”.
The evaluation is done according the following criterias
Voltage drop
Voltage rise
Flicker
Harmonics
Voltage unbalance
Reactive power compenastion
Commutation
Evaluation of measurements
Selectivity analysis and breaking condition for LV-fuses (fuse reach)
and considers power quality issues, especially in respect of renewable energies, e.g. wind, photovoltaic.
The base calculation are loadflow, voltage drop, short circuit , harmonic and motor starting analysis.
The software is available as own product “NEPLAN-DACH” or as a module within NEPLAN. NEPLAN-DACH is available as desktop or browser based solution in the cloud and has a limited set مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 242 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
GIS, SCADA or Smart Grid application providers can have direct access to the functions of NEPLAN 360 without using an Inteet browser, in particular to all calculation modules. A huge number of Web Services is available for this purpose, e.g.
to create and modify the network (with or without graphical representation)
to assigning loads, measurements or switch states
to perform any calculation available within NEPLAN 360
to retrieve all results from the calculation
to administer users
to handle errors
to monitor,control and optimize a network
In this case the software is hosted on a NEPLAN Inteet or Intranet server and can be used without Graphical User Interface.
Reference: NEPLAN
مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 250 تاريخ : چهارشنبه 24 شهريور 1395 ساعت: 4:30
The program WinIGS performs analysis and design of a grounding system or multiple grounding systems that are an integral part of an electric power system. Specifically, it allows the user to model any power system together with its grounding structures, it analyzes the performance of the system under steady state, normal, and fault conditions, and evaluates its performance against industry-standard criteria. The user may select either the IEEE Std. 80 criteria or the IEC-479-1 criteria, both of which have been integrated into the program.
The power system network data as well as the grounding system geometric data are edited via specialized GUI based editors, which are tightly integrated into the WinIGS program. Specifically, the network data are edited via a network editor, which displays the power system in single line diagram form. The network topology can be manipulated using the mouse. Device parameters can be accessed by double clicking on the device drawing. Analysis results, co مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : نویسنده : electrical-power-enga بازدید : 240 تاريخ : چهارشنبه 17 شهريور 1395 ساعت: 11:46
Multi-Layer Soil Modeling. The geometric ground model now supports up to 4 soil resistivity layers. Soil model with 3 or 4 layers are modeled using the complex depth image method. Furthermore, the soil data interpretation tools now provide 2 or 3 resistivity layer models. Specifically, two and three resistivity layer soil models can be derived from either Wenner, Schlumberger, or Driven-Rod soil measurement data.
Rotatable Uniform Rectangular Ground Mat. The rectangular uniform ground mat element can now be rotated about a vertical axis by any angle
Reduced Network Impedance/Admittance Matrix. A new analysis option has been added which provides the network admittance or impedance matrix at a user defined port. The user defined port may consist of up to 8 user selected nodes.
Identify Ungrounded Derived Systems. A new analysis command has been added which identifies any parts of the network that do not have a path to ground. Specifically, this command displays a list o مهندسی برق قدرت...
ما را در سایت مهندسی برق قدرت دنبال می کنید
برچسب : جدیدترین قابلیت های تلگرام, نویسنده : electrical-power-enga بازدید : 261 تاريخ : چهارشنبه 17 شهريور 1395 ساعت: 11:46